One, I'm lazy and hate to do any more than just the minimum amount of typing. I log in to RR to import data for several reasons. Obviously you'll have to write the revised Favorites List to your scanner and save the file as the very last steps. The Trunk Options tab will allow you to choose whether to import all channles or primary, or alternate control channels as you wish. Here you have the ability to choose to either import the shortened alpha tag for the channel names, or the longer channel description. One thing to note: In the middle of the Radio Reference WebService Window, you'll see three tabs about a 1/3 of the way down. Lastly you can edit the newly added System(s), assigning quick keys and so on as desired. You can continue this process if you want to add other systems. The additional system is added to the browser with your original Favorites List. Lastly, click the green Import command button. Once you've got the lower pane (data tab) populated with data, check the desired boxes for what you want to add to your existing Favorites List. Then go to the desired state, next county or agency as appropriate. Then click on the Internet tab>Radio Reference. In ARC, you can add a new system to an existing Favorites List quite easily. ARC does some things better than Sentinel and vice versa.Īfter programming something to my scanner using one of the programs, I'll read the scenner and save the data to the other program, so I'll have parallel files. In the meantime, if anyone knows a source of legacy Prolific drives including the XP driver version 1.5 from a reliable source, please respond.I'm using both Sentinel and ARC 536 Pro. I think they should be able to furnish the driver I need. My next step will depending on Scanner Master's response. The above process has thus far has taken over a week of email exchanges and numerous installations followed by no success. I intend to contact Scanner Master regarding the above discrepancies. As far as Scanner Master's assistance, they have referred me to BUTEL. The last email exchange from BUTEL is that I need to install the oldest legacy driver version 1.5. After information BUTEL, they said not to use the v2.0.0.19 driver and that they were unaware Scanner Master had changed there Driver Package for the USB-to-Serial cable. The second Prolific driver that is installed is v2.0.0.19. After installing the two drivers, I only see the driver for Windows 7 and not the driver XP that was described in the above text file. The included text support file that comes with the ZIP Driver file describes a XP driver and a Windows 7 driver that will be installed. ![]() The two drivers included in the Scanner Master web link do not meet this criteria. Repeating the above, BUTEL has stated to use the oldest legacy XP driver you can find for the Prolifc PL2302 Chip. The link above will redirect you to Scanner Master's web site where you download the following driver package: The link for the driver package from Scanner Master is shown below. According to BUTEL, you need the oldest XP drivers that you can find. BUTEL has tried to be helpful but the Driver Package that they recommended from Scanner Master does not include the correct XP driver for the Prolific PL2302 chip. As an update, I've exchanged numerous emails with BUTEL. Response to FTDI-based USB to serial cable suggestion If anyone has had similar experience and knows how to correct the above problem, please comment. The operator's manual provided on the CD Rom does not specifically address a USB-1 test/setup process, or if something on the scanner has to be re-configured differently using a USB-1 cable. The only option to check Communication Setup from the ARC-XT Pro Top Menu is using a RS232 Setup connection/verification. I have asked for further assistance from BUTEL but have not heard back from them as yet. I get the same response using the other USB ports. ![]() But when I connect the laptop to my UNIDEN BCD996XT via the USB-1 cable and attempt to download systems loaded on the scanner using the Main Menu command (Download from Scanner), I get the message "Serial port is not available or used by other software." There nothing plug into the port other than the USB-1 cable. My laptop device manager recognizes the USB-1 cable and says it operating properly. According BUTEL, this driver supports both XP and Windows 7 OS’s and proven to work. With BUTEL assistance I got the correct driver for the USB-1 cable (v3.4.36.247 dated ). I’m looking for someone who has successfully installed and operated the ARC-XT Pro Software with the USB-1 cable interface to a Windows OS 7 laptop.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |